FabiaTech Corporation
22
Standard CMOS Setup
This section describes basic system hardware configuration, system clock setup
and error handling. If the CPU board is already installed in a working system, you
will not need to select this option anymore.
¾
Date & Time Setup
Highlight the <Date> field and then press the [Page Up] /[Page Down] or [+]/[-]
keys to set the current date. Follow the month, day and year format.
Highlight the <Time> field and then press the [Page Up] /[Page Down] or [+]/[-]
keys to set the current date. Follow the hour, minute and second format.
The user can bypass the date and time prompts by creating an AUTOEXEC.BAT file.
For information on how to create this file, please refer to the MS-DOS manual.
¾
Hard Disk Setup
The BIOS supports various types for user settings, The BIOS supports <Pri Master>, <Pri
Slave>, so the user can install up to two hard disks. For the master and slave
jumpers, please refer to the hard disk’s installation descriptions and the hard disk
jumper settings.
You can select <AUTO> under the <TYPE> and <MODE> fields. This will enable auto
detection of your IDE drives during boot up. This will allow you to change your hard
drives (with the power off) and then power on without having to reconfigure your
hard drive type. If you use older hard disk drives, which do not support this feature,
then you must configure the hard disk drive in the standard method as described
above by the <USER> option.
Summary of Contents for FP8100 Series
Page 6: ...vi ...