FabianoSteel SVH 326, User Manual, Page: 13 / 53

Stop & Go function for all models
• Makes cooking easier!
When cooking, your doorbell rings, phone rings, or kid shouts from another door. Need to step out of kitchen?
These means dinner could burn, or take longer time to ready if you switch everything off.
• The Stop & Go function can turn off all zones. When you back, with one more touching of the button , hob
restarts where they were, to carry on cooking.
EN
1. Active Stop & Go function
To active Stop & Go function, you can press the Stop & Go function button once. Then all programmer setting
be hold on and hob stop heating, all heat setting indicators show “P” (PAUSE)
2. Inactive Stop & Go function
To cancel Stop & Go function, you can press the Stop & Go function again, after come back. Then all
programmer setting will return to what they were, Stop & Go indicator “P” disappear from all indicators.
When Stop & Go function active, all control buttons are disable except the ON/OFF and Stop & Go button.
Note : The hob will auto turn off, if Stop & Go function last more than 10 minutes.
TIMER function for all models
When the hob is turned on, you can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set time
is up.
• You can set it to turn either or more than one cooking zones off.
• You can set the minute minder/timer for up to 99 minutes.
Using the Timer as a Minute Minder
If you have not selected any cooking zones
1.Touch the timer control button , the number in timer indicator flashing.
2. Then adjust Minute Minder setting follows below:
1) Touch control models:
• Set heat setting by touching the "+" or "-" button.
• If press and hold either of the two buttons, the value will adjust down or up rapidly in circle.
Note: When the timer indicator flashing, touch timer control button another time, can quick confirm the timer
setting.
Note: For model SVH 646 , please skip step 1, just need to directly touch the "+" or "-" button of timer to adjust
setting and set Minute Minder.
2) Slider Touch control models:
• Touch the timer control button once, the number of single digit in timer indicator flashing, then adjust
single digit of minute minder setting by sliding the slider control.
• Press the timer control button again , the number of tens digit in timer indicator flashing, then adjust tens
digit of minute minder setting by sliding the slider control.