UK/IRL
UK/IRL 21
5. REMOTE CONTROL
5.1 Remote control (if applicable)
The remote control is only meant to regulate the flames, it functions only when the
pilot burner is ignited. It is therefore not possible to ignite the appliance with the
remote control or to shut-off the pilot flame.
The radio-frequency remote control is intended for fireplaces installed in a domestic
setting in all EU countries, except Austria, Denmark, Finland and Greece.
Features:
-
Manual control will always remain possible.
-
The remote control is a radio frequency type and has been approved internationally.
-
The remote control generates a unique safety code every time you activate the
transmitter, it's similar to those used in a car.
-
The remote control is easy to install retrospectively.
UK/IRL
UK/IRL 22
5.2 Installation remote control
1. Connect the transformer to the receiver box.
2. Slide the receiver box into the holder.
3. Connect the wires to the gas valve.
4. Check that there are batteries in the transmitter. See "Replacing batteries".
5. Set the on/off switch on the receiver to "on".
Summary of Contents for TIMRA
Page 2: ......
