Faber STILO SUPREMA STSP30SSV, Installation Instructions Manual

Page: 37 / 124

37
Cleaning Exterior surfaces:
Please note, abrasives and scouring agents can scratch range hood finishes
and should not be used to clean finished surfaces.
Stainless Steel finish cleaning instructions:
Clean exterior surfaces with a commercially available stainless steel cleaner.
CLEANING STAINLESS STEEL
CARING FOR FILTERS
CLEANING METAL GREASE FILTERS
The filters must be cleaned every 2 months of operation, or more frequently for par-
ticularly heavy usage, and can be washed in a dishwasher.
• Open the Panel.
• Remove the Filters one at a time, pushing them towards the back of the unit
and at the same time pulling downward.
• Wash the Filters without bending them, and leave them to dry completely
before replacing. (If the surface of the filter changes colour as time goes by,
this will have absolutely no effect on the efficiency of the filter itself.)
• Replace, taking care to ensure that the handle faces forwards.
•
No water can be present in filters before installing back in hood.
• Close the Panel.
CAUTION
:
Completely
dry the
Grease Filters
after washing.