Faber STILO SUPREMA STSP30SSV, Installation Instructions Manual

Page: 13 / 124

13
1.
Place a bracket D on the wall as shown about 1/8" from the
ceiling or upper limit, aligning the center (notch) with the
vertical reference line
X
and mark the wall at the centers of the
holes in the bracket.
2.
Place the second bracket D on the wall as shown, below the
first bracket, at the height of the upper chimney section C
supplied and aligning the center (notch) with the vertical line.
3.
Mark the wall at the centers of the holes in the bracket and mark
the point 1 and 2 for the Hood Body installation as shown(12
5/8" from the horizontal line and 4 9/16" from the vertical line).
4.
Drill ø 5/16" holes at all the center points marked (point
1,2,3,4,5,6) as shown.
3
C
D