Faber SILVA, Installation Manual And User'S Manual

Page: 18 / 26

UK/IRL
33
UK/IRL
32
8.1.3 Burner tray assembly
1. Remove the front, glass and log holder (if applicable).
2. Break the gas supply at the control valve.
3. Unscrew the burner assembly (8 screws) and take them out of
the combustion chamber.
A Atttte en nttiio on n!! A sharp or heavy object can damage the burner.
A The pilot and flame sensing device
B Injector (Spectra at burner inlet )
C Burner tray
D Burner fixing bracket
E
Receiver remote control
F Gas control
8.1.4 P Piillo ott//tth he errm mo occo ou up plle e a asssse em mb bllyy
This is not a serviceable item, both thermocouple and pilot should
be replaced together.
A
B
C
D
E
F
fig 15 burner Silva
C
A
E
F
D
fig. 16 burner Spectra
- Remove the burner tray (see 8.1.3).
- Remove the lead from the pilot spark igniter.
- Break the gas pipe connection to the pilot.
- Unscrew thermocouple nut from the rear of the gas control.
- Unscrew pilot assembly from the burner tray (2 screws).
- Replace and re-assemble in reverse order.
8.1.5 B Bu urrn ne err a an nd d iin njje ecctto orr S Siillv va a
- Remove the burner tray (see 8.1.3).
- Unscrew the burner from the burner tray (4 screws).
- Remove the burner.
- Unscrew the injector.
- Replace and re-assemble in reverse order.
8.1.6 B Bu urrn ne err a an nd d iin njje ecctto orr C Ca ad drra a,, S Sp pe eccttrra a,, P Prriissm ma a,, P Pa an no orra am ma a
- Remove the burner tray (see 8.1.3).
- Unscrew the burner from the burner tray (4 screws).
- Break the gas connection at the burner inlet.
- Unscrew heat-shield from the burner tray.
- Unscrew elbow connection from the burner inlet.
- Unscrew the burner from the burner tray and remove the burner.
- Unscrew the injector from the burner inlet.
- Replace and re-assemble in reverse order.
A Governor
B Adjusting screw pilot flame
C Inlet pressure test point
D Burner pressure test point
C D D C
A B
B
A
fig. 17 fig. 18