UK/IRL
29
UK/IRL
28
8.1.7 Pilot/thermocouple assembly
- Remove the burner tray (see 8.1.3).
- Remove the lead from the pilot spark electrode.
- Break the gas pipe connection to the pilot.
- Unscrew thermocouple nut from the rear of the gas control.
- Unscrew pilot assembly from the burner tray (2 screws).
- Replace and re-assemble in reverse order.
8.1.8 Burner and injector
- Remove the burner tray (see 8.1.3).
- Unscrew the burner from the burner tray (4 screws).
- Break the gas connection at the burner inlet.
- Unscrew heat-shield from the burner tray.
- Unscrew elbow connection from the burner inlet.
- Unscrew the burner from the burner tray and remove the burner.
- Unscrew the injector from the burner inlet.
- Replace and re-assemble in reverse order.
A. Governor
B. Adjusting screw pilot flame
C. Inlet pressure test point
D. Burner pressure test point
C
D
D
C
A
B
B
A
fig. 23
8.1.6 Burner tray assembly flatfiber burner
1.
Remove the front, glass and log holder (if applicable).
2. Break the gas supply at the control valve.
3. Remove the cable from the TTB (see fig. 6 and 8).
4. Unscrew the burner assembly (8 screws) and take them out of the
combustion chamber.
Attention!
A sharp or heavy object can damage the burner.
A. The pilot and flame sensing device
B. Injector (Spectra at burner inlet)
C. Burner tray
D. Gas control
E. Receiver remote control
F. Fixing bracket
A. Thermocouple
B. Spark electrode
C. Pilot hood
fig. 21 burner
A
B
C
D
E
F
A
B
C
D
fig. 22
