background image

EXPLODED PARTS DIAGRAM - 

NIGHT 25

Replacement Parts List - 

NIGHT 25

1. Heater Assembly (with cutouts)   . . . . . .2203720100RP
2. Remote Control . . . . . . . . . . . . . . . . . . .3001250100RP
3. Main Control Board  . . . . . . . . . . . . . . . .3001650100RP
4. Capacative Controls and Display  . . . . .3001680100RP
5. Power Supply a) 5 Amp   . . . . . . . . . . . .2100250500RP

b) 3 Amp . . . . . . . . . . . . .2100250600RP

6. Thermistor . . . . . . . . . . . . . . . . . . . . . . .3001560700RP
7. Partially Reflective Glass   . . . . . . . . . . .5902890300RP
8. Front Glass  . . . . . . . . . . . . . . . . . . . . . .5902940200RP
9. Flicker Motor  . . . . . . . . . . . . . . . . . . . . .2000480200RP
10. Flicker Assembly    . . . . . . . . . . . . . . . . .5902920300RP

11. 6-Light LED Flame Assembly (5)   . . . . .3001670100RP
12. Media Tray   . . . . . . . . . . . . . . . . . . . . . .5902910300RP
13. 6-Light Coloured Media LED Assembly (5) . 3001570100RP
14. 8-Light Coloured Media LED Assembly (4) . 3001570300RP
15. Mounting Hardware Kit  . . . . . . . . . . . . .9600350100RP
16. Large Acrylic Media . . . . . . . . . . . . . . . .1400130200RP
17. Medium Acrylic Media (2)  . . . . . . . . . . .1400150100RP
18. LED Power Distributor   . . . . . . . . . . . . 3001720100RP

Accessories

Driftwood Accessory Kit (2)  . . . . . . . . . . . . . LF50DWS-KIT

11

6

1

2

3

4

18

10

11

7

12

8

13

13

5a

9

LED Configuration

Flame LED’s (white)
Flame Base (colour)

Media (colour)

11

14

14

13

5b

11

13

14

11

13

14

Summary of Contents for NIGHT 13

















Reviews: