Faber Mertik, User Manual

Page: 4 / 12

User manual Symax
3 < < < <
Dear user
Congratulations on your purchase of a Faber fire! A
quality product from which you will experience
warmth and atmosphere for many years. We
recommend that you read this manual carefully
before using the fireplace. If any problem arises
despite our strict quality control, you can always
contact your dealer or Glen Dimplex Benelux B.V.
For any warranty claims, it is essential you first
register your fireplace. During this registration,
you’ll find all information regarding our warranty.
Details about your fire can be found on page 1 of
this user manual.
You can register your fire at:
www.faber-fires.eu
Glen Dimplex Benelux B.V.
Address: Saturnus 8
NL-8448 CC
Heerenveen
Tel: +31 (0)513 656 500
Email: info@faber-fires.eu
Info:
www.faber-fires.eu
Introduction
Installation and maintenance of the appliance must
be carried out by a professional with proven
knowledge and competence. A professional takes
into account all technical aspects such as heat
radiation and gas connection as well as flue gas
exhaust requirements.
Where the installation instructions are not clear,
national/local regulations must be followed.
Check
Check the fire for transport damage and
immediately report any damage to your supplier.
CE Declaration
We hereby declare that Glen Dimplex Benelux B.V.
released Faber gas-atmosphere heating appliance
by its design and construction method complies
with the Regulation (EU): 2016/426 and (EU)
2015/1188.
Safety instructions for the user

Please note!
It is advisable to always install a screen for the
fireplace if children, elderly or disabled people
are present in the same room as the fireplace.
If regularly vulnerable persons can be present
in the room without supervision, sufficient
protection must always be placed around the
fireplace.

As a fire is a source of heat, hot air
circulation is created. As a result of
natural air circulation, moisture and not
yet cured volatile components from paint,
building materials and carpeted floors are
included in this air circulation. These parts
can settle as soot on cold surfaces. The
moment, using the fire for the first time,
depends on various circumstances.
Consult your installer/dealer about this
matter.

The appliance is designed for atmospheric
and heating purposes, meaning that all
visible surfaces, including the glass, can
become hotter than 100 ° C. An exception
for free standing models is the underside
of the fireplace and the control buttons.

Do not use the remote control and/or App
outside the room where the fire is
situated. Be sure that you are always
aware of the situation around the fire
when it is operated.

The fire cannot be used when: the glass is
damaged or removed or when the
combustion chamber is open.

Do not place flammable materials inside
the combustion chamber.

Do not place extra imitation wood or
other material on the burner or in the
combustion chamber.

Do not place any combustible materials
within 0,5m of the radiation area of the
fire.

Do not allow children to use the remote
control without supervision.
Using the fire for the first time
Provide extra ventilation and open all the windows
of the room during the initial start-up of the fire.
Let the fire burn at the highest setting for a few
hours so that the paint gets the chance to harden
and any released vapours are safely removed. Keep
vulnerable people and pets out of this room during
this process
Cleaning and maintenance
The device must be cleaned and checked by a
qualified specialist to ensure the safe use and to
guarantee a long service life.
The outside of the fire can be cleaned with a clean
damp cloth.
Cleaning of the glass
Remove the glass as described in the installation
instructions. The glass can be cleaned with Faber