EN
9
9
;LKIJJIK e;
v
2 H
70
FveNF v KK ;l KHF HeeE Ke KHF mIJJ k; Kw 4NePFFE IL veJJemLx
• Disconnect the wires to the Commands at the connectors.
• Disconnect the wires to the Light at the
connectors.
• The Hood can be installed directly on the
underside of the wall unit (Minimum 650 mm
from the Cooker Hob).
• Create an opening in the bottom of the wall unit,
as shown.
• Insert the hood until the side supports snap into
place.
• Fasten using the 10 screws
12a
provided.
• Lock in position by tightening the screws
Vf
from
underneath the hood.
• Open the suction panel by turning the specific knob.
• Disconnect the panel from the hood canopy by sliding the
fixing pin lever.
• Remove grease filters.
• Screw the Frame into place
using the 6 screws
12f
, re-
connect the wires to the
Commands and Light,
replace the metal grease
filter and the Panel.
500 - 680
26
0
13
495 - 675
