EN
1
0
10
P
EkPKFE MFNL e; I N FGHIkLK LyLKF
When installing the ducted version, connect the hood to
the chimney using either a flexible or rigid pipe ø 150
or 120 mm, the choice of which is left to the installer.
• To install a ø 120 mm air exhaust connection, insert
the reducer flange
9
on the hood body outlet.
• Fix the pipe in position using sufficient pipe clamps
(not supplied).
• Remove possible charcoal filters.
ø 150
9
ø 120
NFP NPkJIK e; MFNL e; I N ekKJFK
• Cut a hole ø 125 mm in any shelf that may be
positioned over the hood.
• Insert the reducer flange
9
on the hood body outlet.
• Connect the flange to the outlet on the shelf over the
hood by using a flexible or rigid pipe ø120 mm.
• Fix the pipe in position using sufficient pipe clamps
(not supplied).
• Fix the air outlet grid
8
on the recirculation air outlet
by using the 2 screws
12e
(2,9 x 9,5) provided.
• Ensure that the activated charcoal filters have been
inserted.
9
ø 125
8
12e
FJFPKN PIJ Pe;;FPK e;
• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3
mm..
