UK/IRL
>
>
>
>
43
position (if the fire has not been lit for some time it may be necessary to
hold the knob in this position for some seconds to clear the air from the
pipe and allow gas to reach the pilot burner). Once gas is available at the
pilot, continued rotation anti-clockwise will cause the piezo igniter to
spark. This is accompanied by a click at the valve and should result in the
pilot burner igniting. Once the pilot is lit, the control
knob should be held pressed in for 10 seconds. In this time the pilot flame
will have heated the flame supervision thermocouple sufficiently to
operate a hold-on magnet within the valve. Now turn the control knob A
to the
position. This allows gas to enter control knob B.
Knob B
The is the OFF position preventing gas entering the main burner if the
pilot is lit. The knob should be turned slowly anticlockwise. This allows
gas to enter the burner and be ignited by the pilot flame. Once ignition
has taken place, the fire may be set to any level between min. and max.
by adjusting the control knob B.
11.2
To light
1)
Push in and turn the control knob (A) from anticlockwise to the
setting (small flame). You will hear a ignition click. Check that the
pilot is lit (if not repeat).
2)
Continue to hold in the control knob for a further ten seconds to
ensure that the pilot flame is stable.
3)
Release the knob. The pilot should remain alight.
4)
Turn the control knob A to the position.
5)
Turn knob B slowly anticlockwise, the fire should then ignite.
6)
Adjust flames to the required level.
11.3
To extingish
1)
For the main burner turn the control knob B clockwise to position .
2)
To disable knob B turn knob A to the position .
Summary of Contents for Ease (BF100H)
Page 2: ...UK IRL 2 ...
Page 39: ...UK IRL 39 User Manual ...
