Faber e-MatriX 800-500 RD, Installation Manual, Page: 7 / 32

Installation manual MatriX 800/500 RD,ST
6 < < < <
1 Dear user
Congratulations on your purchase of a Faber fire! A
quality product from which you will experience
warmth and atmosphere for many years. We rec-
ommend that you read this manual carefully be-
fore using the fireplace. If any problem arises de-
spite our strict quality control, you can always con-
tact your dealer or Glen Dimplex Benelux B.V.
For any warranty claims, it is essential you first
register your fireplace. During this registration,
you’ll find all information regarding our warranty.

Please note!
The details of your fireplace can be found
in the user manual.
You can register your fire at:
www.faberfires.com
Glen Dimplex Benelux B.V.
Address: Saturnus 8
NL-8448 CC
Heerenveen
Tel: +31 (0)513 656 500
Email: contact@faberfires.com
Info:
www.faberfires.com
1.1 Introduction
Installation and maintenance of the appliance must
be carried out by a professional with proven
knowledge and competence. A professional takes
into account all technical aspects such as heat radi-
ation and gas connection as well as flue gas ex-
haust requirements.
Where the installation instructions are not clear,
national/local regulations must be followed.
1.2 Check
Check the fireplace for transport damage and im-
mediately report any damage to your supplier.
1.3 CE Declaration
We hereby declare that Glen Dimplex Benelux B.V.
released Faber gas-atmosphere heating appliance
by its design and construction method complies
with the Regulation (EU): 2016/426 and (EU)
2015/1188.
Product: gas room heater
Model: MatriX 800/500 RD
MatriX 800/500 ST
This declaration will become null and void as soon
as the unit is in any way modified without written
authorization of Glen Dimplex Benelux B.V.
2 Safety instructions

Please note!
It is advisable to always install a screen for the fire-
place if children, elderly or disabled people are
present in the same room as the fireplace. If regu-
larly vulnerable persons can be present in the
room without supervision, sufficient protection
must always be placed around the fireplace.
• This appliance must be installed according
with the rules in force and used only in a
sufficiently space.
•
The appliance must be checked annually
in accordance with this installation man-
ual and the applicable national and local
regulations.
•
Ensure that the data on the type label
matches the local gas type and pressure.
• The appliance is designed for atmosphere
and heating purposes. This means that all
visible surfaces, including the glass, can
become hotter than 100°C. An exception
by free standing models is the underside
of the fireplace and the control buttons.
•
Do not use the remote control and / or
app outside the room where the fire is lo-
cated. So that you are always aware of the
situation around the fireplace when it is
being operated.
• The settings and the construction of the
fireplace must not be changed!
• Do not place extra imitation wood or
other material on the burner or in the
combustion chamber.
•
Do not place any combustible materials
within 0,5m of the radiation area of the
fire.
•
Through the natural air circulation of the
fireplace moisture and uncured volatile
components from paint, building materi-
als and carpeted floors, etc. are attracted.
These parts can settle as soot on cold sur-
faces. Therefore do not light the fireplace
shortly after installation.
2.1 Using the fire for the first time
Provide extra ventilation and open all the windows
of the room during the initial start-up of the fire-
place. Heat the stove for a few hours at the highest
setting so that the paint gets the chance to harden
and any released vapors are safely removed. Keep
vulnerable people and pets out of this room during
this process.