34
The Activated Charcoal Filters (#
FILTER6
) are not washable and cannot be
regenerated, and must be replaced approximately every 4 months of operation,
or more frequently with heavy usage.
1. Remove the Filter, pushing it towards the back of the unit and at the
same time pulling downward.
2. Remove the saturated Activated Charcoal Filters, as indicated (
A
).
3. Fit the new Filters, as indicated (
B
).
4. Replace, taking care to ensure that the handle faces forwards.
CAUTION
: When used in recirculation mode, to Reduce the Risk of Fire
and Shock use only conversion kit Model #
FILTER6
A
B
W
REPLACING THE ACTIVATED CHARCOAL FILTER
REPLACING BULBS
LED lights must be replaced by Faber factory authorized service.
Summary of Contents for BREVA PRO 11
Page 6: ...6 RANGE HOOD DIMENSIONS 36 30...
Page 12: ...12 VENTING METHOD REAR OR TOP VENTED Horizontal Vertical 8 8 Rear 8 Go to Pg 13 Go to Pg 14...
Page 13: ...13 MOUNT THE DAMPER INTO THE HOOD 1 Attach the Damper E with 4 screws G Top position...
Page 16: ...16 IMPORTANT Attach the 4 previously removed screws to lock the motor in rear place 5...
