28
BUTTON
FUNCTION
INDICATOR
WI-FI CONNECTIONS
Activate / Deactivate the Wi-Fi Connection
function.
A long Press of the speed 2 button with motor
and lights Off to activate / deactivate the WI-FI.
Note: the Wi-Fi function is automatically
activated when the user requests the Wi-Fi
configuration procedure.
Connection to
home wireless
router in
progress.
Wi-Fi connection
activated.
Starting the Wi-fi setup
A long press with the motor and lights Off
to Enter or End the Wi-Fi set-up procedure.
Before starting the procedure use the Faber
Cloud App to register with the IOT Faber
system. Then follow the instructions to add a
new device and register your home wireless
router.
If the procedure is not successfully completed
within a few minutes, stop the set up process
by holding the intensive button for 3 seconds.
Hold the button again for 3 seconds to start
the process. The hood will stop the Wi-fi set up
process if not successfully completed within 15
minutes.
Set Up is in
progress
F - LED
When setup is
finished LED’s
stay lit for 2
seconds.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired Operation.
Summary of Contents for BREVA PRO 11
Page 6: ...6 RANGE HOOD DIMENSIONS 36 30...
Page 12: ...12 VENTING METHOD REAR OR TOP VENTED Horizontal Vertical 8 8 Rear 8 Go to Pg 13 Go to Pg 14...
Page 13: ...13 MOUNT THE DAMPER INTO THE HOOD 1 Attach the Damper E with 4 screws G Top position...
Page 16: ...16 IMPORTANT Attach the 4 previously removed screws to lock the motor in rear place 5...
