Faber-Castell Do Art Pottery Studio Quick Start Manual Download Page 2

1. Keep the battery compartment free from moisture. Never submerge your
    pottery wheel in water. The round plate and tool arm can be removed
    for cleaning. The machine should only be wiped off with a damp towel
    or sponge.
2. The pottery wheel should be cleaned after each use. Dried clay on the
    plate will make it difficult for the wheel to turn and to place the clay flat  
    on the wheel.

3. Remember, all of the creations you make are for decorative 
    purposes only and are NOT suitable for use with food or liquids.

Contents

(needs 4 “C” batteries, not included)

Additional Supplies needed from home

• Newspaper • Paper towels • Small plastic bowl for water

t

ADULT

SUPERVISION

REQUIRED

Cautions:

• Use only Alkaline batteries. 
• 

    

• Do not mix different types of batteries or  
    new and used batteries. 
• Only batteries of the same or equivalent
    type as recommended should be used. 
• Batteries are to be inserted with the
   correct polarity. 
• Exhausted batteries are to be removed
    from the toy wheel. 
• The supply terminals are not to be
   short-circuited. 
• Packaging and instructions must be kept  
   since they contain important information.

The battery compartment is located on the bottom of the pottery 
wheel. A Phillips head screwdriver is required for opening the 
battery compartment.

Important Information About the Paint:

• Before changing colors, rinse and dry your brush thoroughly.

• The paint included is a specially formulated non-toxic, acrylic paint that dries
    permanently on most surfaces, so be careful!
• Cover your work surface with newspaper or the included table cover. Have a cup 
    of water and paper

                                   towels handy.

• Paint can settle and separate over time. Mix each color thoroughly before you 
    begin painting. If the paint seems too thick, stir in a drop or two of water.

Important Pottery Wheel Safety

C

+

-

C

+

-

+

-

+

-

C

C

4 sculpting tools; rolling cutter,

rolling pin, trimming cord with 

handles and sponge

• Wear a smock, apron or old clothes. This acrylic paint can stain. Clean up any spills
    immediately with soap and water. 

• Resealable plastic bags for clay storage • Phillips head screwdriver
• Cookie cutters • Tooth pick or paper clip • 4 “C” batteries

Do not use non-rechargeable batteries.

Summary of Contents for Do Art Pottery Studio







Reviews: