9
8. Remove the splash shield from the fender
area and set aside for future reinstallation.
9. Remove the eleven (11) wheel well liner
bolts. (Figure 3, #1)
10. Remove retainer from the wheel well liner.
(Figure 3, #2)
11. Remove the wheel well liner on both
sides of the vehicle and set aside for future
reinstallation. (Figure 3, #3)
12. Using a small pick or screwdriver, pry out
on the metal spring clip (Figure 4, #2). Pull the
air spring head (Figure 4, #1) away from the
ball stud (Figure 4, #4) while the spring clip is
pulled away. Disconnect the air spring from the
bracket only and leave attached to frame rail.
Rotate forward out of the way.
Figure 5
Figure 4
13. Remove the two (2) lower hood hinge bolts.
(Figure 5, #1)
14. Remove the hood hinges from the fender area
and set aside as they won’t be used with this product.
Figure 3
