7
Hardware kit | 50161
• 3/16” Allen Wrench
• 7/23” Allen Wrench
• 9/16” Open end wrench
• 1/2” Open end wrench
• (2) 7/16” Open end wrench
• 3/8” Drive ratchet
• 3/8” Drive, 9” extension
• 3/8” Drive 9/16” socket
• 3/8” Drive, 1/2” socket
• 3/8” Drive, 13mm socket
• Scissors
• 1/4” Drill bit
• 3/8” Drill bit
• Painters tape
• Pen or pencil
• Knife
• Pick or small flat head screwdriver
• Plastic panel pry bar
• 6” Ruler
TOOLS REQUIRED
Disassemble the vehicle where you
can catalog and store everything.
We suggest labeling and bagging all
the OEM bolts when removing from
the vehicle. Failure to keep track of
parts could lead to an inability to
properly reinstall components.
Organization
We recommend two people
perform the installation as items
are heavy and may need to be held
in place while installing.
Installation
Fab Fours
Identification
Component
Description
QTY
50161- HW
Oil-embedded thrust bearing
2
50161- HW
Oil-embedded flanged sleeve bearing
2
50161- HW
Threadlocker, blue loctite® 242, 0.02 oz. capsule
1
50161- HW
3/8"-16 x 1 1/4 ", yellow zinc, hex cap screw, grade 8
6
50161- HW
5/16”-18, Nylock hex nut
11
50161- HW
5/16”, stainless steel, flat washer
11
50161- HW
5/16”-18 x 3/4", stainless steel, button head cap screw
9
50161- HW
5/16", rubber bonded sealing washer
9
50161- HW
1/2”, yellow zinc, flat washer, grade 8
2
50161- HW
17/32” drill bit with a 1/2” shank
1
50161- HW
3/8"- expandable inset tool
1
50161- HW
3/8"-16 X 3/4” stainless steel, button head cap screw
10
50161- HW
3/8", rubber bonded sealing washer
10
50161- HW
3/8"-16, knurled Rivet Nut
4
50161- HW
10mm, stainless steel, ball stud, 5/16"-18 threads
2
50161- HW
3/8", yellow zinc, flat washer, grade 8
10
50161- HW
3/8", yellow zinc, lock washer, grade 8
6
50161- HW
3/8"-16, yellow zinc, Nylock nut, grade 8
2
50161- HW
1/4”-20 x 1”, yellow zinc, hex cap screw, grade 8
2
50161- HW
1/4"-20, yellow zinc, hex nut, grade 8
2
50161- HW
1/4", yellow zinc, lock washer, grade 8
2
50161- HW
1/4", yellow zinc, flat washer, grade 8
4
