9
4. If you have or are going to install a Vicowl
onto your Gladiator skip steps 4-8 and
install the mounting arms (22080-22081)
to the vicowl using the #8 stainless steel
hardware (50211-HW) Figure 4.
5. Use a T40 star-tip socket to remove three
(3) bolts on the cowl cover. Repeat on
opposite side. Figure 5.
Figure 4
Figure 5
6. Place the 1/2” aluminum spacer in the
upper bolt hole while placing two (2) 1/4”
aluminum spacers in the lower bolt holes
(50211-HW). Figure 6.
Figure 6
