Installation Instructions
Vi-Cowl Light Insert
Product Number: JL3021-22
2018 Jeep JL 4 Door
Copyright 2009 Fab Fours, Inc
. Page 2 of 5
Jl3021-22_Installation_Manual_REV_A
SAFETY PRECAUTIONS
o
Always remove jewelry and wear eye protection.
o
Always use extreme caution when jacking up a vehicle for work. Set
emergency brake and use tire blocks. Locate and use the vehicle
manufacturers designated lifting points. Use jack stands.
o
Always use appropriate and adequate care in lifting components into place.
o
Always ensure components will remain secure during installation and
operation.
o
Always wear safety glasses when installing this kit. A drilling operation will
cause flying metal chips. Flying chips can cause serious eye injury.
o
Always use extreme caution when drilling a vehicle. Always disconnect
power before welding. Thoroughly inspect the area to be drilled (on both
sides of material when possible) prior to drilling, and relocate any objects that
may be damaged.
o
Always use extreme caution when welding a vehicle. Thoroughly inspect the
area to be welded (on both sides of material when possible) prior to welding,
and relocate any objects that may be a fire hazard. When welding in a cab,
make sure the interior surfaces are covered (
e.g.
, welding blanket) and a fire
extinguisher is at hand.
o
Always use extreme caution when cutting and trimming during fitting.
o
Always tighten all nuts and bolts securely per installation instructions.
o
Always route electrical cables carefully. Avoid moving parts, components
that become hot, and rough or sharp edges.
o
Always insulate and protect all exposed wiring and electrical terminals.
o
Perform regular inspections and maintenance on mounts and hardware.
o
Tire may rub at max turn or articulation.
