Installation Instructions
Dodge 1500 Premium Front Bumper
Product Number: F2950, F2951, F2952
Application: 2013-2018 Dodge 1500
Copyright 2008 Fab Fours, Inc.
Page 17 of 21
F295X_REV_A
I. Secure OEM electrical harness to the Fab Fours bumper.
J. Repeat steps A through I for other side.
OPTIONAL: If installing winch and roller fairlead into bumper, do so at
this point. Mount winch to bumper using two bolts to hold in it in place.
Following steps A through C in front bumper installation, then remove bolts
and slide winch left to right as necessary to install stud plates.
Follow the winch manufacturer’s instructions for installation.
If you are
installing a winch with a pulling capacity of 12,000 lbs., the front face
mounting holes must be used.
If not installing a winch, a license plate may be installed onto the front face
of the bumper
.
