Installation Instructions
Dodge 1500 Premium Front Bumper
Product Number: F2950, F2951, F2952
Application: 2013-2018 Dodge 1500
Copyright 2008 Fab Fours, Inc.
Page 20 of 21
F295X_REV_A
Bumper Maintenance & Care
❑
❑
Periodically check and tighten all fasteners.
❑
❑
Stripped, fractured, or bent bolts or nuts need to be replaced.
❑
❑
After washing of the vehicle make sure to fully dry all surfaces
APPENDIX A. Troubleshooting Vehicle Sensors
•
Start with a general inspection of the sensor fitment. Check that both the
sensors and the sensor clips are fully secure and the sensors are properly
centered in the housing.
•
Confirm plastic housing is in the correct mounting holes. Misplaced sensor
housings could compress sensor and give false readings or faults.
•
Use a clean microfiber to wipe the front face of the sensor.
•
Inspect connection. Be sure that the sensor is firmly seated into the harness.
•
Run through several start cycles (i.e. fully turn the vehicle on and off).
•
Finally, disconnect the battery to reset the sensors
.
If sensors still do not work, sensors may have been damaged
during the installation process. Take vehicle to a certified
dealership.
