Installation Instructions
Ford Raptor Vengeance Front
Product Number: D4351, D4352
Application: 2017+ Ford Raptor
Page 4 of 9
B.
Using a flathead screwdriver, carefully remove center plastic piece, indicated
by oval in the center of the OE bumper.
Figure 1a
Figure 1b
C.
Using 21 mm socket, remove the three nuts per side, two are located under
the plastic center piece (ref. fig. 2a-b) and the third accessible from the back
of the frame (ref. fig. 2c). If front OEM bumper contains sonar (ref. fig. 2b),
remove three nuts with 11 mm. If your bumper includes a radar device,
remove it now using an E6 external torx socket. Unplug the device.
