4
▪
SERVICE: Hardware
1.
Technical characteristics
Dimensions:
85.5mm (width) x 150mm (length) x 55mm (height)
Approximate weight:
400g (batteries and paper included)
Operating temperature (closed environments only):
From 0°C to +50°C (From +32°F to +122°F)
Recharging temperature:
From +10°C to +45°C (From +50°F to +113°F)
Storage temperature (non operative):
From -20°C to +60°C (From -4°F to +140°F)
Relative humidity:
20 - 85%
Branches:
Completely autonomous off-line operation
Internal supply:
Rechargeable batteries 1.2V Ni-MH 1600mAH AA (4x)
External power supply and recharge device input:
100-230V AC +/- 10%, 50/60 Hz
Energy consumption:
-Standby - 30mA
-Average operation - 1.3A
Configuration interfaces:
RS232 (COM on Pc). RJ12 (port on Validator)
Printing system:
Directly on paper via thermal print head
Horizontal dot pitch:
0.125mm (approximately 200dpi)
Vertical dot pitch:
0.125mm
Printing width:
48mm
Paper width:
58mm
Paper roll diameter:
44mm
Paper roll length:
25m
Encryption information:
Validation information impressed via barcode by the built-in
thermal printer
Included Accessories
-4x rechargeable 1.2V Ni-MH 1600mAH AA batteries
-1 power supply unit with cord
Not Included Accessories
-Labels to be applied into the dispenser (see relevant chapter)
-Dispenser configuration software (supplied with the CD of the
Parkplus software and to be requested to the HUB Parking tech-
nical support service by email: [email protected])
-Serial cable D9 <-> RJ12 for download from configuration
software
▪
Rechargeable Batteries:
Insert the rechargeable batteries checking the polarity.
Fig.1
N.B. Only use rechargeable batteries
as per specifications
Connect the power supply unit as shown in the picture
▪
Power supply unit:
Fig.2
1.1
Power supply
