PREPARAZIONE DEL MOTORE
NB: Nel caso di tubi con profilo tondo la puleggia di traino deve essere fissata al
tubo, questa operazione è a carico dell’installatore. Per altri profili di tubo il fissaggio
è facoltativo anche se fortemente raccomandato.
ADATTATORE GHIERA
PULEGGIA DI TRAINO
GHIERA
1
2
3
1. Inserire l’adattatore sulla ghiera facen-
do combaciare la scanalatura con la tacca
di riferimento e spingere fino alla battuta.
2. Montare la puleggia di traino sul perno
del motore fino allo scatto della molla
di fermo.
3. Introdurre completamente il motore
nel tubo di avvolgimento.
TM2 PPR
3
A4518_6G85 _Rev.A
IT