FAAC Estate Swing Heavy Duty Series, Instruction Manual, Page: 8 / 33

Too
ls N
ee
ded
Other items that may be needed prior to commencing installation.

16, 14 or 12 gauge, 2 conductor stranded low voltage wire will be required to run
power to your operator.
Length is determined by distance between transformer power
supply and the control box.

A voltage meter and digital camera may be necessary to run diagnostic checks.

4 - 3/8” fasteners will be needed to connect the Base Plate to the wall.
Length and style will be determined by what is needed for a secure anchor for your mate-
rial door.

2 - 5/16” fasteners will be needed to connect the Door Mounting Bracket to the door.
Length and style will be determined by what is needed for a secure anchor for your mate-
rial door.

Hardware to attach the control box to a wall.
1.4

Power Drill and appro-
priately sized bits.

Crescent Wrench

Flat Head Screwdriver

Nuts, Bolts, Anchors
and Washers (see below)

C-Ring Pliers

Phillips Head Screw-
driver

Tape Measure

Level

Wire Strippers

C-clamps

Carpenters Clamps