Proceed as follows to lock the gearmotor:
1.
Fully raise the release lever to the mechanical stop,
Fig. 22 re. 1.
2.
Turn the release anticlockwise as shown in Fig. 22 re.
2.
To maintain the operator intact, avoid pulsing the gate
to operate before resetting the lock system.
9 MAINTENANCE
It is advisable to check the efficiency of the system at least every
6 months, particularly the efficiency of the safety devices
(including the motor thrust force, which must comply with current
standards) and of the release devices.
10 REPAIR
Contact an authorized Repair Centre for repairs.
11 ACCESSORIES
11.1 BATTERY KIT
Install the battery kit as shown in Fig. 24, inserting it in its seat
and securing with screw re. 1. Connect it to the appropriate con-
nector on the board (see relevant instructions).
Refer to the specific instructions for all information on the battery
kit.
Lowering the release lever, both the motor lock, which is
retracted (Fig. 23 re. 1), and the safety micro switch forcing
the automation to STOP (Fig. 23 re. 2) are operated.
11.2 RADIO MODULE
Install the radio module as shown in Fig. 25.
10
Summary of Contents for Estate Swing E-SL 1800
Page 1: ...E SL 1800...
