2)
Let the leaf make contact with the full
open stop point. The opener will then stop
and leaf 2 will begin to open.
OR if not using open stops
2 alt.)
Press P2 to stop the openers opening
motion and leaf 2 will begin to open.
Begin by pressing P1 6 times to light A-E simultaneously. While
the 5 LEDs are lit steadily, hold down
P2
for about 3 seconds. The
operator will start the maneuver process.
Using
P2, Briefly
press the button once for each of the
following motion transitions:
Press for
3
Second
1)
Press P2 to teach leaf 1 opening
deceleration starting point.
Without open stops, press P2
6.3
With open stops, let the gate
make contact,
don’t
press P2
Complete Start/Stop Learning Process
