![background image](http://html1.mh-extra.com/html/faac/edc-01l/edc-01l_manual_3129599019.webp)
Door Controller
17
532226 - Rev.D
EN
Translation of the original instructions
• CONNECTIONS
Control unit
:
The power supply of the device can vary from 11 to 15 V and must be continuo-
us. The power supply voltage is taken directly to the SPInet bus for powering
the FAAC badge readers.
!
WARNING
!!
Use a short-circuit protected power supply, max 3A or with a max 3A fuse.
Do not connect batteries without suitable fuses or protective devices, Max 3A.
The Door Controller unit is protected against reverse polarity.
1
Signalling
LEDs
Programming
Button