FAAC E045, Quick Manual

Page: 14 / 60

E045 6 732785 - Rev.D
ENGLISH
T
ranslation of the original instructions
Display Basic Function Default
Encoder 1 : ON = connected and
registered correctly
Encoder 2 : ON =
connected and registered
correctly
BUS Status :
always ON
OPEN Photocell :
ON = registered and committed
Opening and
closing photocells
: ON = registered and committed
Closing photocells :
ON = registered and committed
Opening
and closing
photocells :
ON = registered
and committed
M2
MOTOR 2 dead-man DRIVE mode (only displayed with the
Mn
=
2
function):
+/R1
OPENS (displaying
oP
) for as long as the button is pressed
-/R2
CLOSES (displaying
cL
) for as long as the button is pressed
--
M1 MOTOR 1 dead-man DRIVE mode:
+/R1
OPENS (displaying
oP
) for as long as the button is pressed
-/R2
CLOSES (displaying
cL
) for as long as the button is pressed
--
tL WORK TIME LEARNING OPERATIONS (SET UP):
Refer to the relative paragraph.
--
St STATUS OF THE AUTOMATED SYSTEM:
1. set the selection:
Y
to SAVE and EXIT programming
no
to EXIT programming WITHOUT SAVING
2. press F to confirm; when completed, the status of the automated system
will appear on the display once again:
Y
00
= CLOSED
01
= OPEN
02
= Stationary and then “OPENS”
03
= Stationary and then “CLOSES”
04
= In “PAUSE”
05
= Opening
06
= Closing
07
= FAIL SAFE in progress
08
= Verifying BUS-2EASY devices
09
= Pre-flashes and then “OPENS”
10
= Pre-flashes and then “CLOSES”