7
These instructions apply to the following model:
FAAC DOMOLINK
The DOMOLINK automated system can automate residential swing gates with leaves of up to 1.8 m in length with 120° max.
opening.
It consists of non-reversing electro-mechanical articulated operators, powered by 12 Vdc, and each operator is coupled to a
control unit. The non-reversing system guarantees the gate will automatically lock when the motor is not operating. A release
system enables the gate to be moved by hand in case of malfunction.
The DOMOLINK automated system was designed and built for controlling vehicle access. Do not use for any other purpose.
DOMOLINK automated system
MODEL
DOMOLINK battery
DOMOLINK transformer
Power supply
12Vdc
Rated absorbed power (W)
48
Max torque (Nm)
70
Max load-free angular speed (°/sec)
23 (0.4 rad/sec)
Use frequency (cycles/hour)
5
(1)
15
(2)
Consecutive cycles
~15
(1)
30
(2)
Recovery time
~10' for each completed cycle
(1)
2' for each completed cycle
(2)
Type of reduction gear
epicycloid
Operating ambient temperature (°C)
-20 ÷ +55
Operator weight (Kg)
2.8
Protection class
IP 44
Leaf max length (m)
1.80
Leaf max weight (kg)
250
Operator overall dimensions LxHxD (mm)
see fig.2
Length of operator power cable (m)
0.7
(CANNOT BE MODIFIED)
Tab. 1
- Technical specifications of DOMOLINK operator
3.
TECHNICAL SPECIFICATIONS
(1)
The 5 cycles/hour are just a reference value for maintaining full efficiency of batteries. 15 consecutive cycles can be averagely
performed with charged battery. The recovery time (battery recharge) is approx. 10' each cycle performed. The consecutive cycles
could be reduced by over 50% at low temperatures (< 0°C).
Fig. 1
1.
DESCRIPTION
2.
DIMENSIONS
a
DOMOLINK operator
b
Rear fitting
c
Front fitting
d
Release
Fig. 2
•
Dimensions in mm
DOMOLINK
OPERATOR
(2)
The 15 cycles/hour are just a reference value for maintaining full efficiency of motorisation. 30 consecutive cycles can be performed
with software thermal protection. Recovery time is 2' each cycle performed.
