pg. 3
TEACH A WORKING KEYPAD TO A NEW KEYPAD
1.
First you will need to put the working keypad in
“Teaching” mode.
(# 1234 # 8 # 1)
2.
Place the NEW keypad into “Learning” mode.
(# 1234 # 9 # 1)
3.
Place the NEW keypad on top of the existing keypad as
shown in the image.
4.
On the existing keypad press and hold
#
5.
On the new keypad, press and hold
#
for 5 seconds.
The
Green LED on the new keypad will turn on for
0.5 sec and will beep once to confirm the procedure
was successful.
6.
The first time you use the NEW keypad you will need
to activate the channel. To do this you need to
–
enter
the user code followed by the letter E, wait until green
LED turns off, then press E again.
TEACH A WORKING KEYPAD TO A NEW REMOTE
1.
First you will
need to put the working keypad in “Teaching” mode.
(# 1234 # 8 # 1)
2.
Place the NEW remote
into “
Programming
” mode.
3.
Place the remote on top of the existing keypad as
shown in the image.
4.
On the existing keypad press and hold
#
5.
On the remote, press and hold the button you want to
use for 5 seconds. The
LED on the remote will flash
twice then turn off confirming the procedure was
successful.
6.
The first time you use the NEW remote you will need to
activate the channel. To do this you need to
–
press
the button you have just coded twice within 5 seconds.
