pg. 1
XKP Wireless Keypad
The FAAC XKP W keypad is a wireless keypad compatible with the FAAC range of SLH
transmitters & receivers. The keypad can be programmed in
Easy Operation
or
Advanced Operation
. The XKP W has 4 radio channels (Ch 1, Ch 2, Ch 3, Ch 4) A direct
radio channel can be programmed that is not code protected, which can be activated
using button E.
Easy Operation
–
The following instructions refer to the Easy Operation Mode Only.
The XKP W is factory set to Easy Operation mode. This mode allows one 4 digit code
to be entered to activate one radio channel.
The keypad has 12 programming functions. Below is a list of functions that can be
selected when programming. These instructions will only cover functions 1, 4, 8, 9
For all other instructions please refer to the full manual.
1.
Store a user code
2.
Delete a user code
3.
Delete all user codes
4.
Change the password
5.
Restore factory settings
6.
Direct radio channel Button E
7.
Not used
8.
Teach the radio code
(this allows you to teach the radio code to another device)
9.
Learn the radio code
(this allows you to learn the radio code from a working device)
10.
Set the XKP W Slave
11.
Randomising the radio codes
12.
Easy or Advanced Operation
