2 1
2 2
2 3
B614 24
732998 - Rev.A
1
5
2
3
4
4
1
2
3
1
3
2
4
5
19
60 Nm
13
25 Nm
Tr
ansla
tion of the orig
inal instruc
tions
ENGLISH
ROUND BEAM
1. (
) Screw up the guide
1
in the drive shaft.
2. Insert plate
2
in the drive shaft horizontally in
contact with seeger ring
3
.
!
Position the plate with the holes
4
at the bottom.
L
i
The spacer
5
must not be used and must be elimi-
nated.
3. (
) Removing guide
1
and replacing it.
4. Insert the adaptor
2
, horizontally.
5. Fix in position with screw
3
, interposing washers
4
and
5
.
!
Use the torque wrench to tighten to the torque shown
in the figure.
6. (
) Insert the beam
1
in a horizontal position.
!
To make the insertion of the beam easier, use a stand
for resting it at the end.
7. Insert counter plate
2
.
8. Fix in position with screws
3
, interposing the
washers.
!
Use the torque wrench to tighten to the torque shown
in the figure.
