P a g e
|
2
STEP 1
Please ensure that the door is free swinging, not binding and any closers (such as surface mount, in-
head pivot closers, hinge closers) are removed prior to commencement of installation.
STEP 2
Inside every A951 cardboard box, there is a 1:1 Scale Mounting Template (See below). Please use
this template for the position of the mounting holes, both for the operator and the arm. If for any
reason, this is not available please refer to the A951 manual and pages 12 through to 13 for the
mounting holes positions.
Please also use appropriate fixings for the material that you are fixing the operator to. In General,
60mm of Softwood, 40mm of Hardwood, 10mm of Aluminium or 6mm of Steel.
STEP 5
Depending on the arm used, adjust parameter “at” in Basic Programming as per below.
STEP 3
Once the operator and arm are mounted to the header and door, wire main power to the A951 as
below.
STEP 4
The A951 uses an on-board programming system comprising of a display and function buttons. The
display will invert to display the correct way up depending whether it is mount on a R/H or L/H door.
Programming of the unit can also be undertaken via the KP Evo, which will be required if using the
Master/Slave functionality.
Please see below for a brief illustration on using the on-board programming function buttons for either
Basic Programming or Advanced Programming.
