FAAC 844ER, Manual

Page: 3 / 22

20
% Freq.
Utilizzo
% Fréq.
d’utilisation
% Benutzungs-
frequenz % Frecuencia
de utilización % gebruiks-
frequentie % Duty
Cycle
0
10
20
30
40
50
60
70
80
90
100
1 2 3 4 5 6 7 8 9 10 11 12
Tempo (h) Time (h) Temps (h) Zeit (h) Tiempo (h) werktijd (h)
These instructions apply to the following models:
844 ER Z16 CR - 844 R - 844 R CAT - 844 R RF
The FAAC mod. 844 automated system for sliding gates is an
electro-mechanical operator transmitting motion to the sliding leaf
via a rack or chain pinion appropriately coupled to the gate.
The non-reversing system ensures the gate is mechanically locked
when the motor is not operating and, therefore, no lock needs to be
installed.
The gearmotor is equipped with a mechanical clutch which,
combined with an electronic device, offers the necessary adjustable
anti-crushing safety and guarantees stopping or reversing the gate
movement. A handy manual release makes it possible to move the
gate in the event of a power cut or malfunction. The control
board, if supplied with the gearmotor, it is placed inside the
operator.
The 844 automated system was designed and manufactured
to control access of vehicles. Avoid any other use whatever.
MODEL 844
Power supply (Vac +6% -10% 50-60Hz)
Absorbed power (W)
Reduction ratio
Type of pinion
Rack
Module 4 - step 12.566
Max. thrust (daN)
Max. Torque (Nm)
Winding thermal protection (°C)
Use frequency
70% (see graph)
Oil quantity (l)
Type of oil
Operatine ambient temperature (°C)
Gearmotor weight (Kg)
Protection class
Gate max. weight (Kg)
Gate speed (m/min)
Gate max. length (m) (time-out)
Clutch
twin-disk in oil bath
Protective treatment cataphoresis
Standard equipment
Limit-switch
MSL or inductive
Gearmotor overall dimensions LxHxD (mm) see Fig. 2
Electric motor technical specifications
RPM
Power (W)
Absorbed current (A)
Starting capacitor (µF)
Power supply (Vac +6% -10%; 50-60Hz)
Tab. 1 TECHNICAL SPECIFICATIONS OF 844 GEARMOTOR
where:
Ta = opening time
Tc = closing time
Tp = pause time
Ti
= time of interval between two complete cycles
Use frequency graph
Securing corners
Pinion
Limit sensor switch
Operator cover
780 D Control board
Adjustment screw for
anti-crushing
clutch
Oil filling plug
Operator earthing
Lever operated release
system
Protective side panels
Cover for 780D control
board
AUTOMATED SYSTEM 844 & ELECTRONIC CONTROL UNIT 780D
1. DESCRIPTION AND TECHNICAL SPECIFICATIONS
1.1. MAXIMUM USE CURVE
The curve makes it possible to establish maximum work time (T)
according to use frequency (F).
E.g.: The 844 gearmotor can operate non-stop at 70% use
frequency.
To ensure efficient operation, operate in the work range below the
curve.
Important: The curve is obtained at a temperature of 24°C. Exposure
to the direct sun rays can reduce use frequency down to 20%.
Calculation of use frequency
The percentage of effective work time (o closing) compared
to total time of cycle (o c pause times).
Calculation formula:
Ta + Tc
%F =
X 100
Ta + Tc + Tp + Ti
Fig. 1
230
650
1 : 30
Z16 - Z20
110 (Z16) - 88 (Z20)
35
120
1,8
FAAC XD 220
-20 ÷ +55
14,5
IP 44
1800 (Z16) - 1000 (Z20)
9,5 (Z16) - 12 (Z20)
40 (Z16) - 50 (Z20)
780D
1400
650
3,5
35
230