17
Warning Light Operation
The function of a warning light depends on how you
connect the light to the 826 MPS terminal strip and how
you set DIP switches S6 and S7. Use the following
tables at the bottom of the page to decide how to set up
your warning light.
Caution:
Setting switch S7 to
on
delays the
opening response of the gate by 5 sec in
all
logical operating modes and delays the closing
response in E1 and E2 for 5 sec while the
warning light behaves according to the setting
of switch S6 for closing.
Gate Orientation
Caution:
If you have already defined the gate's
midpoint or set the limit switches and if you
want to change the gate orientation, set switch
S8
only when the ADL light (LED LD5) is
illuminated.
Note:
Changing the setting of DIP switch S8 after
you have set the limit switches
requires
you to set
the limit switches again.
Switch S8 is used to set the gate's orientation. You must
set switch S8 before you set the limit switches for fully
opened and fully closed positions of the gate leaf.
While standing on the same side of the gate leaf as the
operator is located (see Figure 13), determine whether
the gate leaf moves to the left or right when closing and
set the switch according to Figure 13.
Set the Limit Switches
WARNING!
Setting the limit switches
requires the main power to the operator to be on
while you work with the control panel. Do not
touch other parts of the operator with the main
power on. Observe standard rules of electrical
safety while setting the limit switches.
Caution:
Take great care in setting the limit
switches, in particular the midpoint of the gate
leaf's travel. Failure to properly set the limit
switches can result in mechanical failure of the
limit switch module or can make the gate leaf
incapable of fully opening or fully closing.
Warning Light Wired to Terminals 8 and 9
Switches
Behavior of Warning Light According to Gate Leaf Status
S6 S7
closed
5-sec
before
opening
opened or
opening
5 sec before
closing
closing
on off off on on on on
on on off on on on on
off off off on on on
flashes
off on off on on
flashes
flashes
Warning Light Wired to Terminals 8 and 10
Switches
Behavior of Warning Light According to Gate Leaf Status
S6 S7
closed
5-sec
before
opening
opened or
opening
5 sec before
closing
closing
on off on on off off off
on on on off off off off
off off on on off off
flashes
off on on off off
flashes
flashes
