770 N
2
732615 - Rev.A
ENGLISH
Translation of the original instructions
Thank you for choosing our product. FAAC S.p.A. is sure you will
get the performances you expect to satisfy your requirements. All
our products are the result of a many years’ experience in the
fi
eld
of the automated systems.
Store this manual for future reference.
GENERAL SAFETY REGULATIONS
1.
Do not transit when the leaves is moving.
2.
Do not stand within the range of the leaf movement.
3.
Keep radio-controls, or any other pulse generators, well away
from children.
4.
Do not allow children to play with the automated system.
5.
The automated system must not be used by children, persons
with limited physical and mental capacities or persons lacking
experience or the necessary training.
6.
Do not willingly obstruct leaf movement.
7.
Prevent any branches or shrubs from interfering with leaf move-
ment.
8.
Keep indicator-lights ef
fi
cient and easy to see.
9.
Do not attempt to activate the gate by hand unless you have
released it.
10.
In the event of malfunctions, release the gate to allow access and
wait for quali
fi
ed technical personnel to do the necessary work.
11.
Do not in any way modify the components of the automated sy-
stem.
12.
Request maintenance service every six months, as provided for
in current safety regulations.
OPERATION DESCRIPTION
The
770 N
automated system consists of an irreversible electro-
magnetic gearmotor housed in a corresponding supporting box.
The gearmotor is invisibly installed in the ground and therefore
does not affect the aesthetics of the gate.
When in rest position, the gate leafs are closed.
When a pulse is sent, the unit sets the motor in motion, which will
begin to open the leafs until opening is complete.
Once the opening phase is completed, if an automatic operation
logic has been selected, the unit will begin the pause time count.
Once the set pause time has expired, the unit commands the
gate to close.
If instead a semi-automatic operating logic has been selected,
once the opening phase is completed, a pulse must be sent to
close the leafs.
For details on operating the gate and all the installed accessories,
please speak with the installation technician.
MANUAL OPERATION
1.
Use the differential switch located upstream from the system to
cut off power.
2.
Open the lock covering plug, ref.1.
3.
Insert the key and turn it until it stops, ref.2.
4.
Open the release lever, ref.3.
5.
Manually move the leaf, ref.4.
6.
Place the release lever back in position.
1
2
3
4
RESTORING NORMAL OPERATION MODE
1.
Use the differential switch located upstream from the system to
cut off power.
Manually move the leaf until the release device engages, ref.
.
2.
Place the release lever in rest position, ref.
.
3.
Turn the key until it stops, ref.
.
4.
Close the protective plug, ref.
.
5.
Ensure that the leaf cannot be moved manually.
6.
Power on the system and perform a few cycles to ensure that the
automated system is operating correctly.
1
2
3
4
MAINTENANCE
Have the system inspected every
six months
, as provided for in
current safety regulations.
This booklet contains a form for reporting servicing. Ensure that it
is
fi
lled in all its parts.
REPAIRS
Do not make any attempts at repairs and contact only quali
fi
ed
FAAC S.p.A. personnel and service centres.
SPECIAL APPLICATIONS
No special applications are provided for.
