P a g e
|
36
Regulatory Compliance
FCC ID : 2ALPX-PRIME7-4GQA
Grantee: Advanced Electronic Solutions Global LLC
This device complies with Part 15 of FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Output power listed is ERP below 1GHz for Part 22 and EIRP above 1GHz for
Part 24. RF
exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The
antenna(s) used
for this transmitter must be installed to provide a separation distance of at
least 20 cm from
all persons.
End Users must be provided with transmitter operation conditions for
satisfying RF exposure compliance.
The manufacturer cannot legally offer technical support to non-qualified gate
or door installers. End users should employ the services of a professional
installation company to commission or support this product!
NEED MORE ASSISTANCE?
Tel:
+1 800-221-8278
www.faacusa.com
Summary of Contents for 4400
