F5 i5000 Series, Platform Manual, Page: 37 / 72

1. Make sure that you have a live power supply unit (PSU) already installed in your system if you want
to hot swap a PSU while the system is running.
2. Before removing the PSU from your system, disconnect the AC power cord from the power supply by
pulling one or both of the power cord locking tabs away from the power supply.
Important: Locking AC power cords might not be available in all countries.
3. Remove the failed AC PSU by squeezing the ejector latch and pulling straight toward you.
Note: After you remove a power supply unit (PSU) from the system, ensure that the replacement PSU
has been unpowered for 30 seconds to ensure that the PSU circuitry is fully discharged before
inserting the replacement PSU into the system.
4. If a connector protective cap is installed on your new PSU, remove it prior to installing the PSU into
your system.
Platform Guide: i5000/i7000/i10000/i11000 Series
37