F5 i5000 Series, Platform Manual, Page: 31 / 72

The DHCP screen displays.
b) Make sure that the DHCP option is set to OFF .
If the DHCP option was set to ON , tap OFF , and then tap Commit to save the change.
c) Tap Back to return to the Management screen.
If you selected IPv4, this screen displays:
If you selected IPv6, this screen displays:
d) Tap IP Address .
The IP Address screen displays.
e) Use the left, right, up, and down arrows to configure the management IP address and the length of
the routing prefix for the IPv4 or IPv6 management IP address.
For an IPv4 address, this screen displays:
For an IPv6 address, this screen displays:
f) Tap Commit to save your changes.
Platform Guide: i5000/i7000/i10000/i11000 Series
31