F5 i10000 Series, Platform Manual

Page: 21 / 72

1. Open the Traffic Management Shell (
tmsh
).
tmsh
2. Change to the network module.
net
The system prompt updates with the module name:
user@bigip01(Active)(/Common)
(tmos.net)# user@bigiq01(Active)(/Common)(tmos.net)#
3. Display the valid media types for a specific interface.
list interface <interface_key> media-capabilities
Important: In all Gigabit Ethernet modes, the only valid duplex mode is full duplex.
This is an example of the output that you might see when you run this command on interface 2.0:
net interface 2.0 {
media-capabilities-sfp {
none
auto
40000SR4-FD
40000LR4-FD
}
}
Valid media types
This table lists the valid media types for the
tmsh interface
command.
Note: This platform might not support all of the media type options that are available in the Traffic
Management Shell (
tmsh
).
10BaseT half 100BaseTX full
10BaseT full 1000BaseLX full
10GBaseER full 1000BaseCX full
10GBaseLR full 1000BaseT half
10GBaseSR full 1000BaseT full
10GBaseT full 1000BaseSX full
10SFP+Cu full auto
40GBaseSR4 full none
40GBaseLR4 full no-phy
100BaseTX half
About network interface LED behavior
The appearance and behavior of the network interface LEDs on the platform indicate network traffic
activity, interface speed, and interface duplexity.
SFP/SFP+ port LED behavior
The appearance and behavior of the SFP/SFP+ port LEDs indicate network traffic activity, interface
speed, and interface duplexity.
Platform Guide: i5000/i7000/i10000/i11000 Series
21