manualshive.com logo in svg

F5 6900, Platform Manual

Share
Download
F5 6900 Platform Manual Download Page 67

Replacing AC Power Supplies

Platform Guide: 6900 and 8900

7 - 1

About the AC power supply

The 6900/8900 platform contains, by default, a total of two hot swappable 
AC power supplies. The platform supports power redundancy, which 
ensures that the system is unaffected if a single power supply fails.

WARNING

Running without both power supplies installed in the platform can affect 
cooling and electromagnetic interference (EMI). If you need to run the unit 
with only one power supply, you must install a blank supply bracket into the 
other power supply slot. The blank supply bracket is required to maintain 
proper airflow in the system. If you do not have a blank supply bracket, 
leave both supplies installed and unplug the unused power supply.

WARNING

This product is sensitive to electrostatic discharge (ESD). We recommend 
that when you install or maintain the unit, you use proper ESD grounding 
procedures and equipment.

Note

Depending on the model and revision type of the power supply, you may 
need either a Phillips or a flathead screwdriver to complete these 
procedures.

Summary of Contents for 6900































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands