manualshive.com logo in svg

F5 2000 Series, Manual

The Bosch 2000 Series Program Entry Manual is a comprehensive user manual that provides step-by-step instructions for configuring and operating the Bosch 2000 Series product. This essential manual is available for free download on our website, ensuring easy access for users to optimize their experience with this high-quality product.

Share
Download
background image

Configuring a management IP address using the LCD panel

You can use the LCD panel to configure the management IP address. The management IP address enables
you to access the Configuration utility to configure other aspects of the product, such as the product license,
VLANs, and trunks. The options are located in the System menu.

Note:  When using the LCD panel to configure the unit, make certain to use the Commit option to
save all settings.

1. Press the X button to activate Menu mode for the LCD.

2. Press the Check button to select System.

3. Press the Check button to select Management.

4. Press the Check button to select Address Type, and then press the Check button again to select either

IPv4 or IPv6.

5. Use the arrow keys to select Mgmt IP and press the Check button.

6. Use the arrow keys to configure the management IP address.

7. Use the arrow keys to select Prefix Length and press the Check button.

8. Use the arrow keys to configure the length of the routing prefix for the IPv4 or IPv6 management IP

address.

9. Use the arrow keys to select Mgmt Gateway and press the Check button.

10. Use the arrow keys to configure the default route for the management interface.

11. Use the arrow keys to select Commit and press the Check button.

17

Setting Up the 2000/4000 Series Platform

Summary of Contents for 2000 Series





























Reviews:

No comments

Related manuals for 2000 Series

Brands by name

Popular brands

Load more brands