Loosen to screw with M2 Hex.
wrench key. Loosen and take away
throttle stem and font valve seat.
Remove screw and deflector with
M3 Hex. wrench key.
Take away rear valve’s seat and
spring with flat screw driver.
Loosen and take away screw, washer,
O-ring end support, O-ring, O-ring
center support and spacer with two
pieces M3 Hex. wrench key. Replace
O-ring, then reassemble.
First reassemble space and one side O-
ring center support, O-ring, O-ring end
support, washer and screw.
Insert
parts
into
body.
Then
reassemble the parts on the other side.
Fix all parts with two pieces M3 Hex.
wrench key.
23
