TRT800H / P/N 800ATC-H-(2xx)-(26x)
Operation and Installation
39
Document-No: 03.2126.010.71e / Revision: 2.00
4.5.2 Transponder configuration/record structure
Aircraft related parts of transponder configuration are stored in one out of
eight possible records (record=presetting). Each record contains the
following information:
•
Aircraft Address (AA, 24bit)
•
Aircraft category (AC)
•
Flight identification (FID, 6-8 numbers/letters)
•
RS-232 Interface setting (eg. GPS protocol)
•
Ground-Switch setting (Installed Yes/No)
•
Speed category (RI) of the respective aircraft
•
Remote Header setting (Installed Yes/No)
User related settings (e.g. squawk codes, display contrast) are stored
once in one global record (transponder internally).
4.5.3 Transponder configuration/record handling
At least one record is stored in external memory. Up to 8 records can be
additional be applied during setup process.
If more than one record is applied, the active record must be selected out
of a list (determined by FID) during start-up of the transponder.
Previously applied records can be deleted again by filling FID with zero’s
only.
4.5.4 General Setup
Any menu item can be passed by
MODE. If no changes
are made the original settings will remain stored.
Modification of one menu item does not impact the others.
No entries will be deleted.
