F-SECURE POLICY MANAGER 9.0 Page 74 Administrator'S Manual Download

Page: 74 / 102

Troubleshooting

Below are some examples of problems that may be logged as error messages in the

fsaua.log

file.

Solution

Reason

Problem

Check that the network is configured
correctly.

Network problems

There was a DNS lookup failure, or
connection failed, was lost or
refused.

Check and correct the HTTP proxy
password in the

http_proxies

directive in the

fsaua.cfg

file.

The password entered for HTTP
proxy is incorrect.

Proxy Authentication failed.

Free some disk space to enable the
update.

There is not enough free disk
space on the drive where the
destination directory is located.

The disk is full or there was an IO
error.

Unknown

There was a server error or an
unspecified error.

| F-Secure Policy Manager | Updating virus definition databases

Summary of Contents for POLICY MANAGER 9.0







































































































Search results

Summary of Contents for POLICY MANAGER 9.0

Reviews:

Related manuals for POLICY MANAGER 9.0

Brands by name

Popular brands

F-SECURE POLICY MANAGER 9.0, Administrator'S Manual

Search results

Summary of Contents for POLICY MANAGER 9.0

Reviews:

Related manuals for POLICY MANAGER 9.0

Brands by name

Popular brands