F.F. Group CS 14/2400 PRO, Original Instructions Manual

Page: 10 / 70

CS 14/2400 PRO | English 10
TECHNICAL DATA
Article Number 43 285
Model CS 14/2400 PRO
Rated voltage
V 220-240
Hz 50/60
Rate power W 2400
No Load Speed min -1 3900
Cutting disc diameter mm 355
Cutting disc bore mm 25,4
Cutting capacity
at rectangle 0º
mm 95x205
Cutting capacity
at square 0º
mm 115x115
Cutting capacity
at L-profile 0º
mm 140x140
Soft Start ✓
Weight kg 20
Sound emission values determined according to
EN 62841-1, EN 62841-3-10
Typically the A-weighted noise levels of the
product are:
Sound pressure level dB(A) 95,53
Sound power level dB(A) 108,53
Uncertainty K dB 3
Vibration total values ah (triax vector sum) and
uncertainty K determined according to
EN 62841-1, EN 62841-3-10
Vibration level max:
a
h ,HD
m/s 2 3
K m/s
2
1,5
NOISE /VIBRATION INFORMATION
The vibration level given in this information sheet
has been measured in accordance with a stand -
ardized test given in EN 62841-1 and may be used
to compare one tool with another. It may be used
for a preliminary assessment of exposure. The
declared vibration emission level represents the
main applications of the tool. However if the tool
is used for different applications, with different
accessories or insertion tools or is poorly main -
tained, the vibration emission may differ. This may
significantly increase the exposure level over the
total working period. An estimation of the level
of exposure to vibration should also take into ac-
count the times when the tool is switched off or
when it is running but not actually doing the job.
This may significantly reduce the exposure level
over the total working period. Identify additional
safety measures to protect the operator from the
effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organiza-
tion of work patterns.
IDENTIFICATION
The numbering of the components shown refers to
the representation of the power tool on the graph -
ic pages.
1. Lock-off button for On/Off switch
2. On/Off switch
3. Handle
4. Retracting blade guard
5. Spindle lock
6. Cutting disc
7. Angle stop
8. Clamping spindle
9. Quick-release button
10. Spindle handle
11. Mounting holes
12. Κey
13. Base plate
14. Locking screw for angle stop
15. Transport safety-lock
16. Tool arm
17. Transport handle
18. Blade guard
19. Spark guard
20. Tool spindle
21. Clamping flange
22. Washer
23. Βolt
ASSEMBLY
f
Avoid unintentional starting of the machine. During
assembly and for all work on the machine, the power
plug must not be connected to the mains supply.
DELIVERY SCOPE
Carefully remove all parts included in the delivery
from their packaging.
Remove all packaging material from the machine
and the accessories provided.
Before starting the operation of the machine for
the first time, check if all parts listed below have
been supplied:
f
Cut-off saw with mounted cutting disc
f
Key 12
NOTE
Check the power tool for possible damage.
Before further use of the machine, check that all
protective devices are fully functional. Any lightly
damaged parts must be carefully checked to ensure
flawless operation of the tool. All parts must be
properly mounted and all conditions fulfilled that
ensure faultless operation. Damaged protective de -
vices and parts must be immediately replaced by an
authorised service centre.
STATIONARY OR FLEXIBLE MOUNTING
To ensure safe handling, the machine must be
mounted on a level and stable surface (e. g., work-
bench) prior to using.
MOUNTING TO A WORKING SURFACE
Fasten the power tool with suitable screw fasten-
ers to the working surface. The mounting holes 11
serve for this purpose.