F.F. Group CRH/2-20-BL 20V PLUS, Original Instructions Manual

Page: 9 / 44

f
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
f
Hold power tool by insulated gripping surfaces
when performing an operation where the cut-
ting accessory or fastener may contact hidden
wiring. Cutting accessory and fasteners contacting
a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an
electric shock.
f
Use appropriate detectors to determine if util-
ity lines are hidden in the work area or call the
local utility company for assistance. Contact
with electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion. Pene-
trating a water line causes property damage.
f
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance. The power tool is guided more secure with
both hands.
f
Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure
than by hand.
f
Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the
power tool.
f
Do not open the battery. Danger of short-circuiting.
f
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
f
In case of damage and improper use of the bat-
tery, vapours may be emitted. Ventilate the area
and seek medical help in case of complaints. The
vapours can irritate the respiratory system.
f
Use the battery only in conjunction with your
FF GROUP power tool. This measure alone pro-
tects the battery against dangerous overload.
f
The battery can be damaged by pointed objects
such as nails or screwdrivers or by force applied
externally. An internal short circuit can occur and
the battery can burn, smoke, explode or overheat.
PRODUCT DESCRIPTION
AND SPECIFICATIONS
INTENDED USE
The power tool is intended for hammer drilling
in concrete, brick and stone. It is also suitable for
drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control
and right/left rotation are also suitable for screw -
driving.
IDENTIFICATION
1. SDS-plus tool holder
2. Locking sleeve
3. Rotational direction switch
4. On/Off switch
5. Selector switch for drilling/hammer drilling
6. Button for depth stop adjustment
7. Handle (insulated gripping surface)
8. Dust protection cap
9. Led
10. Auxiliary handle (insulated gripping surface)
11. Depth stop
TECHNICAL DATA
Article number 43 203
Model CRH/2-20-BL 20V PLUS
Rated voltage V 20
Impact rate bpm 0-4.500
No load speed rpm 0-1.420
Tool holder SDS PLUS
Speed control ✓
Right/left rotation ✓
Drilling diameter, max.
Concrete mm 22
Steel mm 13
Wood mm 28
Weight without battery kg 2,3
Sound emission values determined according
to EN 60745-1, EN 60745-2-6
Typically the A-weighted noise levels of the product are:
Sound pressure level dB(A) 86,4
Sound power level dB(A) 96,6
Uncertainty K dB 3
Vibration total values a
h
(triax vector sum)
and uncertainty K determined according
to EN 60745-1, EN 60745-2-6
Vibration Level
a
h
m/s 2 6,052
K m/s
2
1,5
ASSEMBLY
BATTERY CHARGING
The battery supplied is partially charged. To
ensure full capacity of the battery, completely
charge the battery in the battery charger before
using your power tool for the first time.
The lithium-ion battery can be charged at any
time without reducing its service life. Interrupt-
ing the charging procedure does not damage
the battery. The lithium-ion battery is protected
against deep discharging by the “Electronic Cell
Protection (ECP)”. When the battery is empty, the
machine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
f
Do not continue to press the On/Off switch
after the power tool has been automatically
switched off. The battery can be damaged.
REMOVING THE BATTERY (FIGURE B, C, D,E)
The battery is equipped with two locking levels
that should prevent the battery from falling out
CRH/2-20-BL 20V PLUS
www.ffgroup-tools.com
English | 9