F.F. Group AC-D 24/2MC EASY, Original Instructions Manual

Page: 6 / 32

GENERAL pOwER TOOL SAFETY wARNINGS
wARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for
future reference. The term “power tool” in
the warnings refers to your mains-operated
(corded) power tool or battery-operated
(cordless) power tool.
wORk AREA
f
keep work area clean and well lit. Cluttered or
dark areas invite accidents.
f
Do not operate power tools in explosive atmo -
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
f
keep children and bystanders away while oper -
ating a power tool. Distractions can cause you to
lose control.
ELECTRICAL SAFETY
f
power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapt -
er plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
f
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
f
Do not expose power tools to rain or wet condi -
tions. Water entering a power tool will increase the
risk of electric shock.
f
Do not abuse the cord. Never use the cord for car -
rying, pulling or unplugging the power tool. keep
cord away from heat, oil, sharp edges and moving
parts. Damaged or entangled cords increase the risk
of electric shock.
f
when operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor operation reduces the risk
of electric shock.
f
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
pERSONAL SAFETY
f
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
f
Use personal protective equipment. Always
wear eye protection. Protective equipment such
as hearing protection used for appropriate condi-
tions will reduce personal injuries.
f
prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source, picking up or carrying the tool. Carrying
power tools with your finger on the switch or ener -
gizing power tools that have the switch on invites
accidents.
f
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
f
Do not overreach. keep proper footing and bal -
ance at all times. This enables better control of
the power tool in unexpected situations.
f
Dress properly. Do not wear loose clothing or
jewelery. keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelery
or long hair can be caught in moving parts.
pOwER TOOL USE AND CARE
f
Do not use the power tool if the switch cannot be
turned on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
f
Disconnect the plug from the power source be -
fore making any adjustments, changing accesso -
ries, or storing power tools. Such preventive safe-
ty measures reduce the risk of starting the power
tool accidentally.
f
Store idle power tools out of the reach of chil -
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
f
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tools operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f
Use the power tool accessories and tool bits
etc. in accordance with these instructions, tak -
ing into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could re -
sult in a hazardous situation.
SERvICE
Have your power tool maintained in operation
by an authorized service and use only original
spare parts. This will ensure that the safety of the
power tool is maintained.
CONNECTION TO THE pOwER SUppLY
Make sure the power supply information on the
machine’s rating plate are compatible with the
power supply you intend to connect it to.
This appliance is Class II* and is designed for con-
nection to a power supply matching that detailed
on the rating label and compatible with the plug
fitted.
ENGLISH
| English 6 AC-D 24/2MC EASY - AC-D 50/2MC EASY